Hi Jim,

I am using the ACCEL made by EDA.
I use for some time now, and find it very very good and easy to work with.
Unfortunately is not freeware ...

Sena




> Hi folks,
>
>      Do any of you use software to design PCB's which fits the following
> specs:
>
>      a.  Reasonable learning curve;
>      b.  Reasonable cost or shareware;
>      c.  Windows 98 environment;
>      d.  Stable (ie. few crashes, etc.);
>      e.  Needn't be industrial strength, but must
>          print traces to laser printer and suggest trace routes;
>
>      As you can tell, I'm new to creating boards, so if you have any other
> advice or links to advice in this vein, please let me know. Thanks.
>
> Jim Murphy
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>
>


*********************************************************
Antonio Sergio Sena     CT2GPW
asena@bigfoot.com
+ 44.785.5917270
+ 44.131.4664365

BEng Electrical & Electronic Engineering
Heriot-Watt University - Edinburgh

Homepage: www.qsl.net/ct2gpw
*********************************************************

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body