Jose Angel,

I have just finished the first phase of a rover where two stepper
motors are controlled each one with a 16F84, and both 16F84s
are coordinated by a third 16F84 which gets commands from a
dip switch and communicates serially with the motors' 16F84s.
This is similar to what you are trying to do.

I am trying to find time to post the programs and drawings
in my web page : www.ilari.org. Up to now, only the TRX routine
has been posted but as soon as I finish my income tax return :-( I
will post the remaining information I have about the project.

Cheers

Joan

>  -----Mensaje original-----
>  De: pic microcontroller discussion list
>  [mailto:PICLIST@MITVMA.MIT.EDU]En nombre de Jose Angel Navarro
>  Enviado el: martes, 08 de mayo de 2001 23:14
>  Para: PICLIST@MITVMA.MIT.EDU
>  Asunto: [PIC]: RS232 to Stepping motors
>
>
>  Hi!
>
>  I'm just new to PIC and I have to work on a proyect for reading
>  text output
>  from a RS232 and drive two stepping motors from the values in
>  text strings.
>
>  Will you, please, tell me just the starting point?
>
>  First I think in PIC16F84 but reading I think there are some
>  others better
>  for reading RS232
>
>  Is there any developer kit with 2 stepping motor control that
>  let me start
>  doing tests?
>
>  Thanks in advanced :-)
>
>
>  ________________________________
>  _______Jose Angel Navarro_______
>  _____welcome.to(ba/rra)janc_____
>  ___janc(arroba)altavista.net____
>  ________________________________
>
>  --
>  http://www.piclist.com hint: The list server can filter out subtopics
>  (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu