> Ok, so I have the clock coming in @ 4MHz, effectively 1MHz to the
processor.
> If I set the prescalar to 1 and assign it to the WDT I'll get a 1:1
> prescalar and an interrupt every ~244us.

256uS actually.  How on earth did you get 244us?

> Now I know that I can add to that
> value to speed it up so that's good, but my one problem with this is, I
> don't want to use the Watchdog timer... If I have it disabled but still
> assign the prescalar to the watchdog, will it be disabled?

You really need to so some manual reading.  Check out the section about
assigning the prescaler to the watchdog timer.  What does it say, if
anything, about the assignment effecting whether the watchdog is enabled or
not?  Read the watchdog timer section.  What if anything does it say about
the watchdog enable being effected by the prescaler assignment?  Also read
the section on the configuration bits.  If you still have questions after
doing this homework, I'll try to help.


********************************************************************
Olin Lathrop, embedded systems consultant in Littleton Massachusetts
(978) 742-9014, olin@embedinc.com, http://www.embedinc.com

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads