> -----Original Message-----
> From: "Th=F6rnqvist, Lars" [SMTP:lars.thornqvist@INTERMEC.COM]
> Sent: Friday, April 27, 2001 9:10 AM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      [PIC]: How to program a pic with a pic????
>=20
> Best Pic'ers
>=20
> Have anyone programmed a pic with a pic before?=20
>=20
> I want to program a 16F872  with a 16F877.=20
> I plan to store the program in an external EE-Memory connected via =
I2C to
> the 877.
> And then read byte by byte from EE, into the F877 and write it to the
> F872.
>=20
> Is it just to put program voltage on 872, and write to it???? Which
> signals
> are needed??
>=20
> Any help would be apreciated
>=20
>=20
> Best Regards
>=20
> Lars Th=F6rnqvist
>=20
Tony Nixons "Pocket" programmer does just this, and is a fully open =
sourced
product.  Check out http://www.bubblesoftonline.com/pocket/pocket.html =
. If
you are going to be using this for a commercial application you will =
have to
arrange this with the author.

Mike

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads