>Clearview Mathias emulator from Tech-tools. When I try to program a chip
>(so i can deliver a prototype to the user) I cannot receive any data. On
>the hardware side, it appears that for some reason the uC is holding the RX
>line high (checked between the MAX232 and the uC).


The only thing I can imagine is that the pin is configured as an output and
latched to '1'.  Are you sure your configuration word is correct for that
port?

--Andrew
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.