Hi guys,

I am in a kind of "cant see the wood for the trees" scenario regarding =
the initialisation of the I/O for the 12c508 that hopefully someone can =
help me with. I simply configuring the device to enable GPIO,0,1,4 & 5 =
as outputs and GPIO,2 & 3 as inputs. I am setting the configuration =
fuses to disable the mclr and to enable the Internal rc oscillator, the =
problem is that I cannot toggle outputs 4 & 5 through simulation in =
mplab. I know that I must be missing something ridiculous but I cannot =
see it, any suggestions greatly received.

Thanks in advance=20

Andy

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu