> And I appreciate the time and trouble you're going through to > search your recently acquired archive of this type of data They say no good deed goes unpunished. I'm absolutely over the moon that I looked into this because when retrieving the box of manuals from the basement I got to having a tidy up (if I tell you my other nickname is Baldrick and my greatest fear is not electrocution but an avalanche does that help ?). In a box I have ignored for 5 years I found a big Akai stereo amp in working order. I've a vague recollection of it being given to me possibly because it was faulty. So I thought what the hell, if it's faulty powering it up won't hurt. And it's got perfect sound. The tuner lights don't work and the speaker selector knob is missing but I don't care about that. It's especially great to find it because my 25yo JVC popped its clogs a few weeks ago with an extreme hissy fit. Just saved me from shelling out $700 for a new mini-system But anyway, I've got these details for an LQ9D011, which I hope is similar to the 013. I'll carry on looking later for LM's. I also want to figure these out as one project I have in mind is an LCD-display logic analyser From the IPC Porta-PC P2-486 rev1.0 manual, and there's plenty of text to go with this, explaining the video sub-system and the driver IC, a GD6340 (or CL-GD6340) Sharp LQ9D011, 0.27mm dot pitch, 171mm x 130mm, backlight CCFT, paper-white LCD, hi-res 640x480. 512 simultaneous colours in Mode 13 (640x480), 16 colours in Mode 12 (640x480) Under the heading "COM1 (interface signal)" in the LCD section 1 CK Clock signal for sampling each data signal 2 GND 3 Hsync 4 Vsync 5 R0 Red data signal LSB 6 R1 Red data signal 7 R2 Red data signal MSB 8 GND 9 G0 Green LSB 10 G1 Green data 11 G2 Green MSB 12 GND 13 B0 Blue LSB 14 B1 Blue data 15 B2 Blue MSB COM2 (Signal & power supply) 1 Vcc +5V 2 Vcc +5V 3 GND 4 GND 5 ENAB data enable signal 6 TST This shall be electrically opened during operation (?) -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listserv@mitvma.mit.edu with SET PICList DIGEST in the body