At 05:39 PM 3/19/01 -0800, Freddie Leaf wrote:
>Hi Piclist,
>I'm looking to make or buy a SMD to DIP adapter.  Does
>anyone have any experience with such devices and know
>where I can buy one?  I'm specifically looking for a
>14 pin adapter.  Thanks.

What lead spacing?

Warning: blatant advertising follows:

I just received (today) my latest batch of SOIC to DIP adapter boards.  I
have available: 8 pin (does both narrow and wide SO parts), 16 pin (0.15")
and 28 pin (0.3").  All are for 0.050" lead spacing.  Prices are: US 1.00
any of the following: (5) SO-8 to DIP, (3) SO-16 to DIP, or (1) SO-28 to
DIP.  Please add US 0.75 for shipping.

I also have a few combo boards that contain: (3) SO-8, (3) SO-16, (2) SO-28
for a total of US5.00 each including shipping.

Note that these are sent to you as small strips of PC material with several
adapters on each strip and that you have to use scissors or tin snips to
separate them.  You also have to supply your own pins for the DIP
connections (I use cut off resistor leads).

Please contact me via PRIVATE email if you can use any of these.

dwayne



Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 17 years of Engineering Innovation (1984 - 2001)

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics