Hi,
I'm probably going this route in a week or so
( dynamically changing buad rate ), but just by
glancing through your code it seems 'dangerous' to me.
Why not the more 'careful' route there you :

a) disable global irq
b) diable uart irq's
c) disable uart module
d) reconfigure the uart module ( speed )
e) enable uart module
f) enable uart irq's
g) enable global irq

That should work, changing speed or other configuration
while running seems to have to many unknowns to me.

/Tony


Tony K=FCbek, Flintab AB            =

=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2
E-mail: tony.kubek@flintab.com
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu