Hi Jess, is it possible your include file is
corrupted, or you have linked the wrong include file?
-Roman


Jess Hancock wrote:
>
> Thanks Bob and Drew for your responses.
>
> Bob, the documentation indicates the GPIO/TRIS registers are at register
> memory locations 0x05/0x85 and therefore it seems the disassembler should
> know which register is being addressed.  To test, I modified the source code
> below by substituting TRISIO for the first GPIO and then assembled it  and
> got the following hex code and Message[302].  Excerpts from POLARMD2.LST:
>
> 0019   3008           00135 ad0019      MOVLW 0x08
> 001A   00A1           00136             MOVWF 0x21
> 001B   1683           00137             BSF STATUS,RP0
> Message[302]: Register in operand not in bank 0.  Ensure that bank bits are
> correct.
> 001C   1205           00138             BCF TRISIO,4               ; ??? RAM
> Page TRISIO,4
> 001D   1283           00139             BCF STATUS,RP0
> 001E   1605           00140             BSF GPIO,4               ; ??? RAM
> Page TRISIO,4
> 001F   17A1           00141             BSF 0x21,7
> 0020   282E           00142             GOTO ad002E
>                       00143             ;
> 0021   13A1           00144 ad0021      BCF 0x21,7
> 0022   0CA7           00145 ad0022      RRF 0x27,f
> 0023   1803           00146             BTFSC STATUS,C
> 0024   1205           00147             BCF GPIO,4               ; ??? RAM

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics