This is a multi-part message in MIME format.
--------------3FE4ED830BDD9A0E1FB34962
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

> Instead of 'preloading' with a 8, try adding 8 to TMR0 each interrupt.

>
>This should do it.
>
>This accounts for the fact that TMR0 might _not_ be zero when you get
into
>the interrupt routine. In fact it is highly unlikely that it will be!

This is totally true.

You also have to consider that loading (and preloading) "clocked" with a
value of 249 will result in 249 decrements to reach zero (instead of the
250 you are looking for) so try using 250 as the pre-loaded value.

--------------3FE4ED830BDD9A0E1FB34962
Content-Type: text/x-vcard; charset=us-ascii;
 name="promero.vcf"
Content-Description: Card for promero
Content-Disposition: attachment;
 filename="promero.vcf"
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by silena.insitel.com.co id IAA07747

begin:vcard=20
n:Romero Plaza;P=E1vel Ernesto
tel;cell:5489528
tel;fax:6-7444829
tel;home:6-7464233
tel;work:6-7444829
x-mozilla-html:TRUE
url:www.insitel.com.co
org:Insitel Ltda.;Research & Development
adr:;;Calle 21 # 16 - 46 Piso 7;Armenia;Quind=EDo;;Colombia
version:2.1
email;internet:promero@insitel.com.co
title:Hardware Engineer
fn:P=E1vel Ernesto Romero Plaza
end:vcard

--------------3FE4ED830BDD9A0E1FB34962--

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads