Sorry Guys,

I think I confused the matter a little with the 12V.

The AC Motor is brushless and phase control should
work from what I know so far, a lamp dimmer appears to
be the best solution but I needed a ready made circuit
that could be incorporated into an existing design
quickly, we did indeed end up using a lamp dimmer
capable of controlling a 100W bulb, and had to adjust
this manually.

Has anyone got a design that could control flood
lights 500W to 1000W used outside security lights, the
ones used in the back garden with a PID.

We can supply a variable control voltage from 0 to 12V
in 16Bit steps but this will only source a few hundred
milliamps.

Thanks for your help so far

Andy Faulkner



=====

Andy Faulkner andyf97@yahoo.com
Pyrosync International http://www.pyrosync.co.uk

Tel +44 778 896  6087.....................UK Dial 0778 896 6087

Fax +44 870 132 3275.....................UK Dial 0870 132 3275
http://www.event-supplies.co.uk http://www.spectacular-fireworks.co.uk


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year!  http://personal.mail.yahoo.com/

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body