0.000 volts showing Kohms to GND looks like a PIC pin that is driven
permanently low and tristated with some duty cycle or other imho. Try to
hook up a pullup resistor and use a scope on this pin. Small FET outputs
do give 0.000 volts and a few kohms when measured. Typical examples are
outputs from CMOS CD4xxx(x) series logical chips. This is a feature by the
way ;-).

Peter

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu