This is a multi-part message in MIME format.
--------------5925378B9B74FD4CB6C3C6A6
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by silena.insitel.com.co id RAA26711

Hello again.

Today i would appreciate any help telling me where i can find sample
routines or source code to use the analog to digital converter inside
the 17c7xx family.

I already read all the literature in the datasheet (30289a) and reviewed
the code. I am using polling to know when a conversion is ready and then
i am writing the value in ports c and d. But i don=B4t see any change in
ports c and d when i vary the analog input from 0 to 3 volts. The
conversion clock is set to Fosc/32. I am also waiting as much as 200uS
to hit the initial go signal, but even though i can assure the code is
running one conversion after the other, because of a flag in port E, the
value on ports c and d stays fixed.

--------------5925378B9B74FD4CB6C3C6A6
Content-Type: text/x-vcard; charset=us-ascii;
 name="promero.vcf"
Content-Description: Card for promero
Content-Disposition: attachment;
 filename="promero.vcf"
Content-Transfer-Encoding: quoted-printable
X-MIME-Autoconverted: from 8bit to quoted-printable by silena.insitel.com.co id RAA26711

begin:vcard=20
n:Romero Plaza;P=E1vel Ernesto
tel;cell:5489528
tel;fax:6-7444829
tel;home:6-7464233
tel;work:6-7444829
x-mozilla-html:TRUE
url:www.insitel.com.co
org:Insitel Ltda.;Research & Development
adr:;;Calle 21 # 16 - 46 Piso 7;Armenia;Quind=EDo;;Colombia
version:2.1
email;internet:promero@insitel.com.co
title:Hardware Engineer
fn:P=E1vel Ernesto Romero Plaza
end:vcard

--------------5925378B9B74FD4CB6C3C6A6--

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.