Yes, I did... I've already been bitten by that bug one too many times.. But thanks! -- Rob --- James Paul wrote: > Robert, > > Did you set the oscillator for HS operation as opposed to XT when > you went to 20Mhz? If not, the oscillator probably isn't starting > or running at 20Mhz. Just a thought. > > Regards, > > Jim > > > > On Tue, 13 February 2001, Robert Shady wrote: > > > > > I'm not sure if I should really latch on to this > > thread or not with my own problems, but they might > > be related to what your seeing as well, so I'll > > post what's happened to me so far... Which is > > REALLY bizarre.. > > > > *** WARNING -- THIS IS LONG! *** > > > > I've taken Mike's 2wirelcd circuit and wired it > > up, downloaded his 2wirelcd.asm code, compiled, > > and ran -- It worked fine @ 4mhz as stated. > > > > I need to be able to run it @ 20mhz, so I visited > > the time delay code generator at: > > http://www.piclist.com/cgi-bin/delay.exe > > and generated a replacement 160usec delay and > > 5msec delay and put it in a file called delay20.inc > > (thinking I can also make one called delay4.inc and > > just change 1 line of the code to switch between > > 4mhz & 20mhz). I switched everything to use the new > > code and ran it @ 20mhz -- didn't work, tried it @ > > 4mhz -- didn't work. > > > > I revisited the delay code generator and generated > > new 4mhz based delays for 160usec & 5msec and put > > them in delay4.inc, compiled and ran @ 4mhz -- nothing. > > > > Now here's the really funky part... I took the routines > > out of delay4.inc and put them in the lcd.asm code > > compiled and ran @ 4mhz -- worked perfectly. > > > > So I took the routines out of delay20.inc and put them > > in the lcd.asm code, compile & ran @ 20mhz -- nothing! > > > > Any clue? Why would the routines work when compiled > > directly into the code, but not included? Also, I > > couldn't even get the circuit to work just by > > interfacing directly with the PIC, I had to use Mike's > > little flip-flop circuit for some reason... Timing > > issues maybe? > > > > Does anybody have 16F84 (actually 16F84A) code for > > driving an LCD (preferrably with Mike's circuit, it's > > nice only using 2 pins) running @ 20mhz? > > > > -- Rob > > > > > --- David VanHorn wrote: > > > > At 01:45 PM 2/13/01 +1100, Ian Hynes wrote: > > > > >PICers, > > > > > > > > > >Sorry to be a pain but I'm totally stymied with this. It's a > 16F84 > > > > >interfaced via 3 wires to an HD44780 LCD. I'm still learning > this > > > > >stuff so > > > > > > > > You know the 44780 needs three wires, plus four for data, > right? > > > > > > > > > > > > > > > > -- > > > > Dave's Engineering Page: http://www.dvanhorn.org > > > > Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9 > > > > > > > > -- > > > > http://www.piclist.com hint: The list server can filter out > > > subtopics > > > > (like ads or off topics) for you. See > > > http://www.piclist.com/#topics > > > > > > > > > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Get personalized email addresses from Yahoo! Mail - only $35 > > > a year! http://personal.mail.yahoo.com/ > > > > > > -- > > > http://www.piclist.com hint: The PICList is archived three > different > > > ways. See http://www.piclist.com/#archives for details. > > > > > > > > > > > > __________________________________________________ > > Do You Yahoo!? > > Get personalized email addresses from Yahoo! Mail - only $35 > > a year! http://personal.mail.yahoo.com/ > > > > -- > > http://www.piclist.com hint: The PICList is archived three > different > > ways. See http://www.piclist.com/#archives for details. > > jim@jpes.com > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. > > __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.