I mistyped the quote. The corrected entry is below.

1=TMR2 to PR2 register MATCH occurred (must be cleared in software)"
                       ^^^^^^
Robert Rolf wrote:
> Page 23 DS30292A
> "TMR2IF: TMR2 to PR2 match interrupt flag
> 1=TMR2 to PR2 register capture occurred (must be cleared in software)"
>
> Since one sets the PWM period by writing to the PR2 register, and
> since TMR2 gets cleared when it is equal to PR2, it -should- generate
> and interrupt at the end of every cycle. You'll have to clear the flag
> in software.
>
> See page 59 for details of PWM regesters bits. TMR2IF * TMR2IE are
> listed  as associated with PWM so clearly an interrupt is possible.
>
> Spehro Pefhany wrote:
> >
> > At 08:28 AM 2/10/01 -0500, you wrote:
> >
> > Is it possible to use thethe PWM module to also generate an interrupt,
> > synchronized with the 10 bit timer rollover or with the compare
> > match (so the PWM value can be updated)?
> >
> > Best regards,
> >
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> > Spehro Pefhany --"it's the network..."            "The Journey is the reward"
> > speff@interlog.com             Info for manufacturers: http://www.trexon.com
> > Embedded software/hardware/analog  Info for designers:  http://www.speff.com
> > Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
> > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads