At 11:09 PM 2/10/01 -0500, you wrote:
>At 08:28 AM 2/10/01 -0500, you wrote:
>
>Is it possible to use thethe PWM module to also generate an interrupt,
>synchronized with the 10 bit timer rollover or with the compare
>match (so the PWM value can be updated)?

Ok, just an interrupt on TMR2 == PR2 match will do it?
So, TMR2IE must be set.. that easy I guess.

..must..have..more..coffee... ;-)

Best regards,


=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Spehro Pefhany --"it's the network..."            "The Journey is the reward"
speff@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu