The other thing you might want to check if
you haven't already is the actual voltage
output of your power supply.  More than a
few times I've been surprised by what was
SUPPOSED to be a regulated power supply and
the voltage was nearly double...

-- Rob

--- Benjamin Wood <tws_turn1@YAHOO.COM> wrote:
> To answer a few questions that were brought up...
>
> - The 'power on' LED light is not connected to an
> output of the PIC, rather upstream to indicate if
> anything in the circuit is receiving power.
>
> - The LED's do have proper resistors on them.
>
> - I have not used up to this point, as was suggested,
> caps between the pic and the power supply (which is a
> 5V 1A regulated wall wart).
>
> Many thanks all the help so far!
> Regards,
> Benjamin
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail - only $35
> a year!  http://personal.mail.yahoo.com/
>
> --
> http://www.piclist.com#nomail Going offline? Don't AutoReply us!
> email listserv@mitvma.mit.edu with SET PICList DIGEST in the body
>
>


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year!  http://personal.mail.yahoo.com/

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body