Hi, You will not be able to acces it unless you install a router / gateway / DNS. Your internet address is 200.xx.xx.xx. Your intranet address is 192.168.xx.xx. This means it is (the 192.168.x.x range) , if you have done it correctly, shielded from the internet. You have to, some how, pass the incoming packets from 200.xx.xx.xx from your computer to 192.168.xx.xx (And back of course). A router/gateway/DNS incapsulates the outgoing packets from 192.168.xx.xx in such a way that when packets are coming back it knows it has to be routed to 192.168.xx.xx again. There are a lot of useful Linux Howto's (altough not directly related to windows it still is good stuff to read). Consider your PIC server as a computer on a intranet and you will find what you are looking for ! grtz, Simon --- Octavio P Nogueira wrote: > I've been playing with a pic web server and now I > need some help. > My computer has 2 Ethernet board, one is connected > to a ADSL modem and the other to the pic web server. > The pic web server has an address of 192.168.0.3 > the computer Ethernet board is 192.168.0.1 and the > other one connected to the ADSL is 200.221.41.219. > I can connect to the pic web server from my computer > but how can I access it from Internet? Do I need > some > kind of gateway? > > Friendly Regards > > Octavio Nogueira > =================================================== > nogueira@propic2.com ICQ# 19841898 > ProPic tools - low cost PIC programmer and emulator > http://www.propic2.com > =================================================== > > -- > http://www.piclist.com hint: The list server can > filter out subtopics > (like ads or off topics) for you. See > http://www.piclist.com/#topics > > > ____________________________________________________________ Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.