I suggest you should enable your interrupts AFTER the Flash_the)led()
function.  Are you sure that you aren't overflowing the stack with the
combined calls in your main loop and the ISR calls?

Mike

> -----Original Message-----
> From: Nuri ERGINER [SMTP:nerginer@SSM.GOV.TR]
> Sent: Wednesday, February 07, 2001 6:58 AM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      [PIC]: Return From Interrupt
>
> Hi,
>
> I am using hi-tech C to program my pic16f84a. I write a code with
> interrupts.
> But there is a problem. When an interrupt occurs the code perfectly go to
> the inturrupt procedure. When it finish executing the inturrupt procedure
> it begins to execute the main block starting from the begining. Here is a
> demo code:
>
>
> main()
> {
>         GIE=1;
>         INTE=1;
>         Flash_the_led();
>
>         while(1){
>                 Do_other_stuff();
>         }
> }
>
> static void interrupt isr(void){
>         if (INTF) {
>                 inturrupt_stuff();
>                 INTF=0;
>         }
> }
>
> after executing isr() the code went to Flas_the_led() procedure but It
> must
> execute the Do_other_stuff();
> I need your help
>
> Regards,
> Nuri Erginer
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics