> Anyway, the
> slave never gets an interrupt from this code.  The
> o-scope shows the same timing pattern as my successful
> bit-banging code, but the trailing edges of the MSSP's SCK
> line are close to the SDA transitions.  Don't think
> that makes a difference, but...

There is a bug in the MSSP where the master samples the ACK bit on the
falling instead of rising edge of SCK.  This can cause a race condition
where the master sees a NACK instead of ACK.  However, this bug shouldn't
keep the slave from seeing the address byte.


*****************************************************************
Olin Lathrop, embedded systems consultant in Devens Massachusetts
(978) 772-3129, olin@embedinc.com, http://www.embedinc.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body