Great news - I DL'ed the demo. I take the standard version ($400) does
gerber output, you just can't edit it - correct?

Thanks,
Mark

>
>CircuitMaker 2000 Standard is $400 - includes PCB
>Professional is $1000
>
>No pin or part # limits on either
>
>http://www.circuitmaker.com
>
>- -Randy Glenn
>
>This coming from the guy with a system tray 7 icons wide... by 2
>tall...
>=================================================
>Randy_Glenn-at-tvo.org - PICxpert-at-picxpert.com
> PICxpert-at-yahoo.com - PICxpert-at-home.com
>            http://www.picxpert.com/
>=================================================
>
>- -----Original Message-----
>From: pic microcontroller discussion list
>[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Mark S.
>Sent: January 27, 2001 12:27
>To: PICLIST@MITVMA.MIT.EDU
>Subject: Re: [PICLIST] [EE]: Schematic capture/board layout software
>needed
>
>
>Thanks Randy, I should clarify "low cost". I'm thinking about
>$500-$700...
>
>I would love CircuitMaker, but I bet my boss wouldn't go for it!
>
>At 12:19 PM 1/27/01 -0500, you wrote:
>>Mark:
>>
>>It might be a bit difficult to find a low cost capture/layout
>>software with all of the features you indicated.  It also might be
>>difficult to find one that doesn't use the international symbols
>>since a lot of the shareware/freeware packages out there are from
>>Europe, Australia etc.  I quess also, it would depend on what is
>>defined as low cost.
>>
>>Personally, I use the CircutMaker, TraxMaker Pro Suite and am very
>>happy with it.  However the Software Suite is around $1,600.00
>>U.S.D., or was when I purchased it.
>>
>>Eagle is a shareware/freeware type package but is not all that
>>powerful. However it is a good one for the price, which is free.  Go
>>to www.cadsoft.de for the software.
>>
>>Hope this helps,
>>
>>Randy
>>
>>--
>>http://www.piclist.com hint: PICList Posts must start with ONE
>>topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other
>>[BUY]:,[AD]: ->Ads
>>
>
>- --
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>
>
>
>-----BEGIN PGP SIGNATURE-----
>Version: PGP 6.5.1i for non-commercial use <http://www.pgpi.com/>
>
>iQA/AwUBOnMIAmQ6DS7MTlpUEQJ/DQCfSeRT4iCbGEkUIS3RZ7i5YrnnEB8AoNdR
>WDSx1aiZ3sVCAzJTld9gshwS
>=fb0a
>-----END PGP SIGNATURE-----
>
>--
>http://www.piclist.com hint: PICList Posts must start with ONE topic:
>[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads