I would like to connect to a LCD controller and display it on NTSC, the signals =
available are:

4 bits data, line clock, pixel clock, frame sync pulse, AC bias drive. You can =
drive the pixel rate to around 18Mhz and as slow as 0.5Mhz.

Color would also be nice, but an explanation of how to do it in b&w would be a =
good start also.

I saw someone draw color bars with a PIC so I know it should be able to be =
done.

Richard.


  >>  >I mean, would you drive a car knowing that there is a spring loaded
  >>  >knife sitting under your bud?

  >>          Just in the bud? Ahhhh!! :oP

  >>  >Hehe, imagine: You hit a bump; BOING!!!!!

  >>          Ops...

  >>  =
>I-don't-care-what-happens-to-the-guy-because-he-is-not-suppose-to-be-ther
  >>  e-in-the-first-place
  >>  >thing: Criminals got human rights too, you know.

  >>          Yep, they have the human basic right to die...


  >>  --------------8<-------Corte aqui-------8<--------------

  >>          All the best!!!
  >>          Alexandre Souza
  >>          xandinho@interlink.com.br
  >>          Linux User #85093

  >>  --------------8<-------Corte aqui-------8<--------------

  >>  --
  >>  http://www.piclist.com hint: PICList Posts must start with ONE topic:
  >>  [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads