Last night, I was trying other things to simply see that my PIC was working,
since I lacked the MAX232 to work with my 877.  I noticed that nothing was
working (turning on a LED, writing something to eeprom), so I think I might
have wired it wrong, but don't know how it should be.  Could someone maybe
spot a problem and tell me?

I'm using the 877 with the Warp-13 programmer, CCS compiler, and PICProto64
board from meLabs.  For power, it has 11v coming in from a AC-DC adapter,
regulated with a 7505 with a 10uf cap on the incoming power line and a .1uf
cap on the regulated line.  I have checked it, and regulated power is going
through the board fine.

The crystal is where I think it might go wrong.  The crystal is from Jameco
and is the CY20.  It is placed with a 22pf cap on either side.  Is 22pf
right for a 220mhz crystal?  I mainly question this because the Jameco
website/catalog just says "Series" in the impedance column.

I am really new to PICs (haven't even gotten my first one working :).  I'm
going to order a book, so that might help.  Mainly need some schematics and
parts lists for a 877, so I know what is right for this chip.

Thanks a lot for any help you can offer,
  Ken

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics