The Duffer wrote:
>
> I'm looking for a simple design to build a programmer for the 12C672  8
> pin PIC.
> Anyone ?
>
> Please cc your reply direct to me by e-mail.
> Thanks.
> Hugh
>
> ARS: VA3TO
> e-mail hduff_@_ica.net
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu

It uses the same pins as per a 16F84 16C74 etc.

RB6  = CLK                    (GP1 pin 6)
RB7  = Data                   (GP0 pin 7)
VDD  = 5V                     (pin 1)
VSS  = GND                    (pin 8)
MCLR = 13V held low via 10K   (pin 4)
OSC1 = held low via 10K       (pin 2)



--
Best regards

Tony

mICro's
http://www.picnpoke.com
mailto:sales@picnpoke.com

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu