>wires that require broadcast licenses

I know 2 or 3 things about those ;-). The idea is to put all the fast
hardware on the SIMM as SMD and run a SCSI flatcable to other devices that
are to be attached. I do not expect the frequency to go over 50MHz in ANY
case on this external bus and I plan to use terminated lines over
flatcable (common ground) and line buffer/drivers meant for 100MHz.

The first experiment will be done with 'old' SIMMs in a 386 system so
speed will be less of a problem, and I will get a feel of the real
problems (I hope).

Peter

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listserv@mitvma.mit.edu with SET PICList DIGEST in the body