Yeah, but is the time interval displayed a single bit, or perhaps multiple
bit times.

Does the signal have equal rise and fall times?

There is really insufficient information here for an accurate answer.

Bob Ammerman
RAm Systems
(contract development of high performance, high function, low-level
software)

----- Original Message -----
From: Olin Lathrop <olin_piclist@EMBEDINC.COM>
To: <PICLIST@MITVMA.MIT.EDU>
Sent: Thursday, December 14, 2000 3:43 PM
Subject: Re: [EE]: Buad Rate Calculation


> > If I have a UART running  at 42 us then how do I
> > find out the speed.
>
> Get the little thingy with all the funny numbered buttons, then enter "1",
> "/", ".000042", "=".  The kind with a big button labeled "ENTER" requires
a
> little different magic, so better just find the other kind with an "="
> button for now.
>
> >             |--------|
> >             |<42us>|
> >         __|            |____
>
> It never ceases to amaze me when people attempt to do ASCII art with
> porportionately spaced fonts!  DUH!
>
>
> *****************************************************************
> Olin Lathrop, embedded systems consultant in Devens Massachusetts
> (978) 772-3129, olin@embedinc.com, http://www.embedinc.com
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics