> I have a pair of 12 volt batteries wired in series for 24 volts.  In
> addition to running 24 volt motors, I want to run around 10 amps worth of 12
> volt devices.

If your 12V devices are simple loads like light bulbs, solenoids,
etc, you may be able to just provide them with a fixed, open loop 50%
duty cycle, chopped 24V.

Steve.
======================================================
Steve Baldwin                Electronic Product Design
TLA Microsystems Ltd         Microcontroller Specialists
PO Box 15-680, New Lynn      http://www.tla.co.nz
Auckland, New Zealand        ph  +64 9 820-2221
email: steveb@tla.co.nz      fax +64 9 820-1929
======================================================

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.