On Wed, 22 Nov 2000 21:50:06 -0500, Dan Michaels wrote:

>
>Even with a fast Scenix, it is hard to get a 20Mhz controllable
>clock output, but with the ECS chip [only 8-pin] you can get 20,
>10, and 5 Mhz, and then use the uC for slower timing. Problem is,
>with the ECS chip, 20Mhz [nondivided] comes out one pin and
>10/5/... [divided] comes out another pin.

Do the ECS-300 chips go up to 40Mhz? If so, why not just use one with
double your top speed and always use the divided output ? ...

Dan

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu