went over my head.. ascii is the right word
alok


> -----Original Message-----
> From: Simon Nield [SMTP:simon.nield@QUANTEL.COM]
> Sent: Friday, November 24, 2000 11:25 PM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC]: Working dual-clock speeds
>
> see the circuit below.
> someone else probably already suggested the exact same thing.
> i haven't drawn on any load capacitors.
> you'll get glitches as you switch.
> i wonder what happens on power up when the control pin is tri-stated?
> it probably won't work.
>
> pretty ascii circuit though don't you think ?
>
> Regards,
> Simon
>
>
> ____________
>             |
>    in(osc1) |------------------------------.
>             |                              |
>             |                      |[]|    |
>   out(osc2) |------+----[ 1k ]--+--|[]|----+
>             |      |            |  |[]|    |
>             |      |            |          |
>             |      |           _|_         |
>             |      |           \ /         |
>             |      |           _V_         |
>             |      |            |          |
>    control  |-------------------+          |
>             |      |           _|_         |
>             |      |           \ /         |
>             |      |           _V_         |
>             |      |            |          |
>             |      |            |          |
>             |      |            |  |[]|    |
> ____________|      '----[ 1k ]--+--|[]|----'
>                                    |[]|
>
> --
> http://www.piclist.com hint: To leave the PICList
> mailto:piclist-unsubscribe-request@mitvma.mit.edu
>

--
http://www.piclist.com hint: To leave the PICList
mailto:piclist-unsubscribe-request@mitvma.mit.edu