I have some code to take serial NMEA data from a GPS and print position, =
heading, time, and speed at selectable intervals.  I can send you the cod=
e if you want it.  The printer interface part of the
code is very simple.

I also have PC boards and enclosures if anyone else wants a ready made se=
ria in, printer out solution.  It has two optocoupled serial inputs, a DB=
-25 printer connector, and uses a 28 pin PIC.  There is
room for a 4 position DIP switch on the board and a three position switch=
 on the case.

engalt@earthlink.net

Andy Stubbins wrote:

> Hi guys
>
> I am about to look into interfacing a printer to an F876. Before I star=
t has anyone tried this before and if so would you mind pointing me in th=
e direction of any useful links to kick start me off.
>
> Many Thanks in advance
>
> Andy
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> "[PIC]:","[SX]:","[AVR]:" =3DuP ONLY! "[EE]:","[OT]:" =3DOther "[BUY]:"=
,"[AD]:" =ADs

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads