Hint...

Read about the TIMERS.

john darcy wrote:

> Hi, well for a start sorry about my first post...i
> didn't make things too clear. I checked the archives
> but couldn't find anything that helped.
>
> What I need is some code (pic assembly) for a PC16C74A
> to implement the following....
>
> **Generate two square wave outputs, each with a 50%
> duty cycle. Also I want to be able to vary the
> frequency of these signals independently of one and
> other from about 1KHz to 2MHz or as close as I can get
> to these limits.
>
> **The frequency of each square wave will be entered on
> a PC keyboard and sent via the serial port to the PIC
> but at the moment my main problem is trying to set up
> the square waves themselves.
>
> If anyone has some code that I could use to generate
> these square waves and set their frequencies by say
> putting a value in the appropriate register I'd really
> appreciate it. Thanks a million,
>                                 John.
>
> __________________________________________________
> Do You Yahoo!?
> Thousands of Stores.  Millions of Products.  All in one Place.
> http://shopping.yahoo.com/
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.

--
  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.