Hi, Mr w.v.oojien/f. hanneman.

Actually, my receiver is taken out from a spoilt remote electronic device,
and also my IR led, from its remote controller too.

My receiver is written HS38B on it, but I can't find spec. for this part.



"w. v. ooijen / f. hanneman" wrote:

> Take a look at the vishay / telefunken / temic documentation for the TSOP
> IR receivers. Do you use an IR receiver? In that case you must stick to the
> frequency for that device quite accurately (ideally stay within a %). The
> output of an IR receiver is not the ~ 30 kHz signal, but the
> AM-demodulation of it!

signal is not 30khz? Then is what??? I am a bit confuss right now.



> And an IR-receiver can not cope with a continuous
> input signal. Search the web for RC4 for a good code to use with IR.
> Wouter

RC4, is this a standard of a IR signal???

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics