I use a DS1307 and it sure is I2C. Not a bad chip either. ----- Original Message ----- From: "Murray Snowden" To: Sent: Wednesday, November 01, 2000 4:09 PM Subject: Re: [PIC]: Dalls DS1307 clock chip and I2C > No it doesn't support I2C. > > Its a 1-wire network. Check out www.iButton.com. All the examples on site > use Java or C programs running from PC or the TINI board. > > You may find some examples using PIC, but limited examples. > > Murray > ----- Original Message ----- > From: Jean-Michel Howland > To: > Sent: Wednesday, November 01, 2000 7:38 AM > Subject: [PIC]: Dalls DS1307 clock chip and I2C > > > > Hi all, > > > > Can someone who has used the Dalls DS1307 clock chip actually confirm that > > the 2 wire interface it has is I2C compatible? The data sheet NEVER > > mentions I2C. > > > > Regards > > Jean-Michel. > > > > -- > > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > > use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST > > > > > > > > > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST > > > > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST