Hi Frank,
I've been trying to work this one out. I've been using a compare on one
module (generating both rising and falling edges), while using the other
module in capture mode. So far no problems. The documentation on this is
really confusing. Seems to me the only time that using compare and capture
at the same time is if you use the mode that resets the timer.... Anyone
else got any info on this. Have I just been lucky so far?

Andy

----- Original Message -----
From: "Wollenberg, Frank" <F.Wollenberg@gsp-berlin.de>
To: <PICLIST@mitvma.mit.edu>
Sent: Monday, October 30, 2000 6:08 PM
Subject: Re: [PIC]: Using 2 CCP: Compare failed if Capture event the same
time


> Hi all,
> as a result of my tests with capture and compare working together, i get
the
> following answers:
>
> 1)      capture module is working with all configurations of the compare
> module
> 2)      compare module is working with generate interrupt on match only
> 3)      compare module is working with set/clear output on match only if
> timer1 is not stopped temporarely
>
> Case 3 was my big mistake. I've stopped timer1 in the capture service
> routine for reading him.
> I have contacted my local FAE for further information (from Microchip?).
>
> Thanks to the great piclist community.
>
> Frank
> ---------------------------
> GSP Sprachtechnologie GmbH
> Frank Wollenberg
> HW-Entwicklung
> Tel.:   +49 (0)30 769929-78
> Fax:    +49 (0)30 769929-12
> eMail:  f.wollenberg@gsp-berlin.de
>
>
> --
> GSP Sprachtechnologie GmbH
> Teltowkanalstr.1, D-12247 Berlin
> Tel.:  +49 (0)30 769929-0
> Fax:   +49 (0)30 769929-12
> eMail: Info@gsp-berlin.de
> Web:   http://www.gsp-berlin.de
>
> --
> http://www.piclist.com hint: The list server can filter out subtopics
> (like ads or off topics) for you. See http://www.piclist.com/#topics
>
>
>
>

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.