As you are trying to find where the power is being used, I suggest you =
only need to measure current. Within a household the power factor should =
be close enough to 1 for all appliances that the phase difference =
between voltage and current will be minimal.

The highest current path is going to be the one drawing the most power =
unless you are running something like a welding transformer without =
power factor correction.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
"[PIC]:","[SX]:","[AVR]:" =uP ONLY! "[EE]:","[OT]:" =Other "[BUY]:","[AD]:" =Ads