Thanks for that. Seems like this was something that the SX doc's people "assumed" everyone would know since the SX is 5x compatible. James Newton 1-619-652-0593 http://www.sxlist.com mailto:jamesnewton@geocities.com ----- Original Message ----- From: Jerry Merrill To: Sent: Tuesday, October 17, 2000 12:54 Subject: Re: [sxtech] [SX]: math or load of PC ALWAYs clears PC.8? jAMES: I don't know about the SX specifically, but the Microchip docs for the 5x state that ANY instruction with PCL as its destination clears PC[8]. Jerry >Can some one confirm that? or correct me on that point? or point me to where >that third point (and not the first two points) are documented by ANYONE? > >The main thing that concerns me is that the documentation doesn't appear to >me to make that clear. Please prove me wrong. > >--- >James Newton >1-619-652-0593 >http://www.sxlist.com >mailto:jamesnewton@geocities.com > > > > >Egroups help: http://www.egroups.com/info/help/main.html > >Parallax SX tech support: (916) 624-8333 > > -or- mailto:sxtech@parallaxinc.com Jerry Merrill jerrym@tech-tools.com http://www.tech-tools.com FAX: (972) 494-5814 VOICE:(972) 272-9392 TechTools PO Box 462101 Garland, TX 75046-2101 Join our PIC discussion list at http://www.tech-tools.com/picsource.htm Egroups help: http://www.egroups.com/info/help/main.html Parallax SX tech support: (916) 624-8333 -or- mailto:sxtech@parallaxinc.com -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.