I'm guessing that the microphone is a 2-wire electret type...

Thanks for the response.

-Randy Glenn

Randy_Glenn-at-tvo.org - PICxpert-at-home.com
 PICxpert-at-yahoo.com - PICxpert-at-picxpert.com
            http://www.picxpert.com/

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU]On Behalf Of Mark Willis
Sent: Friday, October 20, 2000 8:49 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Re: [PICLIST] [EE]:2.5mm headset pinout


I've metered this one out about 30 times now, you'd think I'd get it
organized or memorized <G>

Tip = Microphone
Middle Ring = Earphone
Other Ring = Ground

  Mark

Randy Glenn wrote:
> Anyone know the pinout for a standard 2.5mm stereo connector cell phone
> headset? I want to build one and save a couple bucks.
>
> Thanks in advance.
>
> -Randy Glenn
>
> Randy_Glenn-at-tvo.org - PICxpert-at-home.com
>  PICxpert-at-yahoo.com - PICxpert-at-picxpert.com
>             http://www.picxpert.com/

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.