..Or u could try to modify your cheap odometer by (if it is using a =
sensor) to=20
registrer more pules, that is fake that the table is spinning faster =
than it really is.
if it uses a hall-effect sensor so glue a bunch of magnets to the =
table.. lets say u
glue 10 magnets to speed it up 10 times it would make it easy to read =
the result
and just divide by ten.


> If it doesn't unbalance the turntable, glue a magnet to the edge of =
the
> turntable and place a reed switch or a hall-effect sensor near the =
edge and
> count the pulses over time.
>=20
>      I am in a pinch. I need to find a complete RPM set-up for an
> experiment. I have a  bodine gear motor that drives a round table via =
a
> v-belt.I needed to know how fast it is rotating so I bought a bicycle
> odometer which I figured would tell me the speed in Miles per hour and =
I
> could do the conversion to RPM the problem is the table goes to slow =
and
> this cheap odometer wont register. My question... Does anyone know of =
a
> supplier of complete RPM systems that would work either on the shaft =
or at
> some radius on the round disk at 1 RPM. I have found plenty of =
parts/ways to
> build this but I just dont have the time. That you in advance for your =
help.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
"[PIC]:","[SX]:","[AVR]:" =uP ONLY! "[EE]:","[OT]:" =Other "[BUY]:","[AD]:" =Ads