Olin Lathrop <PICLIST@MITVMA.MIT.EDU> wrote:

> > > I though if an anlog pin was set as an output you could use
> > > it as an output pin capable of driving whatever.
> >
> > That's true, Tony.
>
> No, it's not.

    Yes, dammit, it IS.

> Some I/O modules will control the pin regardless of the TRIS
> setting, or otherwise "take over" the operation of the pin.

    That's true, too.

> The A/D is a good example of this.

    And that's verifiably false.  Read the datasheet, Olin, or
    just... oh, I don't know... actually TRY it.

    -Andy


=== Andrew Warren - fastfwd@ix.netcom.com
=== Fast Forward Engineering - San Diego, California
=== http://www.geocities.com/SiliconValley/2499

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST