I've been working on trying to interface with and LCD, and have been been=
 able
to get it working with a F84, so since my target device is going to be th=
e
F871, figured might as well port the code over to it, but when I define P=
ortD
to be an output, ie..moving 0x00 to TRISD, and also 0x00 to TRISE, I thou=
ght
that it should have setup portD for output, and also portE (the 3 bits) f=
or
output as well.

OK, so when I use the TRISD I get an error saying it is out of range, and=
 then
I used 0x88 and 0x89 as destinations, I get a warning it is out of the pa=
ge
boundary.

Anyone know how this is supposed to be setup?

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=3D=
1

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST