Hello All.  I am upgrading my production programmer and now have a dedicated
stand alone 8 at once gang programmer for sale.

If you want to be able to program 8 PICs at once by pressing one button, and
having them done in 30 seconds total time, and use the following range of
PICs, you can use this GANG 8 programmer, which is also a single device
programmer when connected to the PC (software to run in PC connected single
programmer mode is at www.adv-transdata.com)

16C62/63/64/65/66/67/72/73/74/76/77

Here are the details:

MODEL PGM40G DIP type (up to 40 pins)

This is the model which copies program and fuse data from a master device
(placed in the programmer at all times) to up to eight devices at one time.

Stand-alone operation when duplicating devices
Single socket programmer when hosted by PC
Copies from a master chip to a maximum of 8 devices
Simple one-key operation
Preset verification voltages at 3V/5.5V or 4.5V/5.5V
Programs hundreds of devices within an hour
Program cycle includes blank check, program and two byte-by-byte,
chip-by-chip verifications
Individual socket LEDs indicate non-blank or program errors
Checksum verification verifies integrity of master chip before each program
cycle
Code protection on the duplicated devices is enabled via a jumper setting



So there it is, for anyone who is interested.  Current new retail is $799.
All offers will be considered, but it's most likely I'll take the soonest
reasonable offer.

Send email to cthorner@hotmail.com if you are interested.

I can email you pics if you need 'em.

Craig


_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at
http://profiles.msn.com.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.