Hi Folks,
    I don't often post but this one has me beaten. I'm simply connecting a
24LC32 to a 17C44 RB2(SDA) and RB3(SCL). I have a pullup resistor on SDA and
my waveforms appear to be correct. However I'm not having success.

Does anyone out there have any C code (preferably Hitech) which could help
me out of this bind.

The problem that I see is that I appear to have no response from the
24LC32 - not even an ack to the command byte.
I put a stop before the start just in case it might be in an unknown state
beforehand - but no joy.

Any advice welcome.

Thanks in advance
John Walshe

PS yes it has power and no it is not dead (I've already replaced it once !)

***************************************************************
John.Walshe@inpactmicro.com

INPACT MICROELECTRONICS (Irl) Ltd
WWW.INPACTMICRO.COM
***************************************************************

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.