Dear All

I have a PIC(16F84) close to my TV and video recorder that monitors =
micro switches and record video when certain things happen.=20

I have connected  RA1 to +5V through a 1K resister to pull it logic high =
and RA1 through a microswitch  to GND to pull it logic low when the =
microswitch closes.

My problem:=20

Every time when I switch the TV off the PIC acts if the microswitch was =
activated...but it is not.
I have disconnect the TV from everything else exept the mains power and =
the problem still remain. Strangely enough is that all the other =
functions of the PIC seems to be normal. It don't seems like the PIC =
resets or anything because after a 20 second delay subroutine the PIC =
must stop the recording and it does so....

Thanks=20

Kindest Regards

Francois Robbertze


              lllllllllll
             \\  ~ ~ //
             ( @ @ )
o------oOOo-(_)-oOOo-----o
|                                   |
|   Francois Robbertze    |
|    fr10@mweb.co.za     |
|                                   |
o--------.oooO-Oooo.-------o

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST