Harold - We have been using an Acromark machine for prox 15 yrs with very little trouble. They are located in Berkley Heights, N. J. 07922 Joe ----- Original Message ----- From: Harold M Hallikainen To: Sent: Friday, September 22, 2000 5:05 PM Subject: [OT]: Engraving/hot stamping knobs? > Trying to take advantage of the manufacturing expertise on the list... > We have a product where we have a bunch of slide pots that control > lighting channels in a DMX stream. The product is modular so we can build > systems of various sizes. This modularity makes it so we cannot > silkscreen the channel numbers on the panel since we don't know until the > sale comes in as to what channels a particular panel will control. > Further, we'd like to avoid stocking thousands of slide pot knobs, all > with the numbers we don't need today, and have none of the ones we DO > need today. > So... I'm thinking we could get a machine to engrave or hot stamp the > numbers on the knobs. Can anyone suggest such a machine? > > Thanks! > > Harold > > > > FCC Rules Online at http://hallikainen.com/FccRules > Lighting control for theatre and television at http://www.dovesystems.com > > ________________________________________________________________ > YOU'RE PAYING TOO MUCH FOR THE INTERNET! > Juno now offers FREE Internet Access! > Try it today - there's no risk! For your FREE software, visit: > http://dl.www.juno.com/get/tagj. > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > use mailto:listserv@mitvma.mit.edu?body=SET%20PICList%20DIGEST > > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics