That's a great help.  I would think that if the Picstart works then the rest
of it should as well. I would think if anything, the serial/parallel comms
would be most likely to cause trouble.

Mike

> -----Original Message-----
> From: robertf [SMTP:robertf@MICROBALANCE.COM]
> Sent: Tuesday, September 19, 2000 8:32 AM
> To:   PICLIST@MITVMA.MIT.EDU
> Subject:      Re: [PIC]: NT compatability
>
> I'm using NT4 SP3 with rev 7 hardware, rev 2.01 firmware Picstart, MPLAB
> ver. 5.00.00- works fine.
> No info on the remainder of your gears.
>
> Robertf
>
> ----- Original Message -----
> From: Michael Rigby-Jones <mrjones@NORTELNETWORKS.COM>
> To: <PICLIST@MITVMA.MIT.EDU>
> Sent: Tuesday, September 19, 2000 3:45 AM
> Subject: [PIC]: NT compatability
>
>
> > I'm shortly to get a new PC here at work, which will (by corporate
> order)
> be
> > running NT4.  I am a little concerned about compatibility with MPLAB,
> > PICSTART+, ICE2000 and the ICD as I have heard of a few people on the
> list
> > having problems.  I believe all these should work under NT but I'd like
> some
> > confirmation before I find out the hard way with dealines looming.
> >
> > Regards
> >
> > --
> > http://www.piclist.com hint: PICList Posts must start with ONE topic:
> > "[PIC]:" PIC only "[EE]:" engineering "[OT]:" off topic "[AD]:" ad's
> >
> >
>
> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> "[PIC]:" PIC only "[EE]:" engineering "[OT]:" off topic "[AD]:" ad's
>
>

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
"[PIC]:" PIC only "[EE]:" engineering "[OT]:" off topic "[AD]:" ad's