Use PWM... Works fine! Miguel ----- Original Message ----- From: Shawn Yates To: Sent: Friday, September 01, 2000 12:50 PM Subject: Re: Manchester Code > I am not sure about the voice part, but manchester encode and decode is > fairly straight forward. Just the other day, someon listed a web site that > had some already done manchester encoding schemes, but I dont have the URL > here. If you dont get it by Tuesday, I will send it then. I did not look > at the link myself. I have written a manchester decoder which I use > extensively. The encoding is striaght forward, the decoding is tricker. > After many problems, I came up with a routine to sample each half cell five > times and decide if that half cell is high or low, based on a majority > count. Then, make sure that each full cell has two complimentary bits. > > Hope that helps some. > > Shawn > > -- > http://www.piclist.com hint: The PICList is archived three different > ways. See http://www.piclist.com/#archives for details. -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.