I've used this setup in several areas, and it always works. Unless you are using an Atmel I2C EE - they don't work all the time. Andy Darren Logan on 08/29/2000 04:02:12 PM Please respond to pic microcontroller discussion list To: PICLIST@MITVMA.MIT.EDU cc: (bcc: Andrew Kunz/TDI_NOTES) Subject: Sharing Eeprom & DAC clock line problems. Hi, I have PIC12C671 which drives a 12-bit serial DAC and communicates with a 24LC01 serial Eeprom. Both peripherals share the same clock line. The DAC works ok, but Eeprom communication seems to be not working. I have a 4k7 pull-up resistor on the Eeprom data and the common clock line. Any ideas as to why the Eeprom doesn't like the shared clock ? (Maybe it isn't the clock at fault but i think everythig else is ok - i.e. wiring, control byte etc.) Regards, Darren -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu -- http://www.piclist.com hint: To leave the PICList mailto:piclist-unsubscribe-request@mitvma.mit.edu