Hi,
Using the ICD frequently and been happy with it's
usefulness. However during the last couple of days something
strange has happened. =

Until recently it ONLY programed used code space, therefore
programming was quite fast. But SUDDENLY ( I cannot recall
me changing anything ) it starts programming the ENTIRE code
space ( even if only 10% used ), this takes forever and i've spent
hours trying to reconfige the beast to start only programming used
code space again but to no avail.
So PLEASE anybody knows what to change ?
( erase all option IS off )

Snippet from Mplab.ini

[MPLAB-ICD]
VERSION=3DMPLAB-ICD Debugger v1.30
INSTALLED=3D1
COM_PORT=3D1
BAUD_RATE=3D1
FUSE_BITS=3D0x3F32
START_ADDR=3D0x0000
END_ADDR=3D0x1EFF
PGM_OPTION=3D1
EE_OPTION=3D0
FUSEBIT_OPTION=3D1
ID_OPTION=3D1
ERASE_OPTION=3D0
ID_CHECKSUM=3D1
DEBUG_MODE=3D1
UPDATE_OPTION=3D3
FREQ_OPTION=3D3

What I'm curios about is the second last one, whats that for ?
( and how can it magically change itself, if this is the culprit ? )
Anybody knows allowed options for this  ?
( hmmm..M-chip ..documentation...yep..)


HELP.. =


/Tony




Tony K=FCbek, Flintab AB            =

=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2
E-mail: tony.kubek@flintab.com
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2=
=B2=B2=B2=B2=B2=B2=B2=B2=B2=B2

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.