There is a good tutorial at http://www.keyghost.com/htpic/ The -fakelocal option permits you to watch local variables. Peter H. Anderson, http://www.phanderson.com, pha@phanderson.com ---- Begin Original Message ---- From: Jim Stoll Sent: Wed, 23 Aug 2000 14:38:14 -0400 To: PICLIST@MITVMA.MIT.EDU Subject: [PIC]:Debugging Hitech C in MPLAB? I've read some things that make me think that its possible to use the M= PLAB source debugging features (stepping/tracing, watches, breakpoints, etc)= with C code generated by the Hitech PIC C Lite compiler, but haven't se= en any examples of how to do so (seems that that's what the 'fake' option = is for?) =A0Is this the case? =A0Has anyone done this? =A0If it can be don= e, do you actually step through the C code or through the generated assembler code? =A0Any tips on setting this up would be most helpful. I've also seen mention of running the compiler from w/in MPLAB, but als= o have not been able to find anything on how to actually do that. Any help would be very much appreciated! Thanks, Jim -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics ---- End Original Message ---- Sign up for Free-for-Life E-mail at http://www.Africana.com -- http://www.piclist.com hint: The PICList is archived three different ways. See http://www.piclist.com/#archives for details.